LDE MTU Series

stubeljProductsDiesel generating set

LDE MTU Series

Genset LDE MTU Series

LDE MTU Series

Power from 700 kVA to 3310 kVA | 1500 rpm. | 50 Hz

Table:LDE MTU Series 50 Hz (click to enlarge)

Catalogue:3-Catalogue_Genset_LDE-MTU.pdf
LDE MTU Series
Series LDE MTU50 Hz - 400/230 V 1500 rpmOverall dimensions and weights - GenSet without housingOverall dimensions and weights - GenSet with housing (72±3 dBA - 7m)
TypeEngineCylindersVolume (cm 3)Fuel consumption
75% load    - g/kWh
Standby power  (kVA)Prime power (kVA)LxWxH (mm)Weight (kg)LxWxH (mm)Weight (kg)
LDE 700 MTU 12 V 2000 G25 12 23880 204 700 630 4400x2000x2350 6250 4400x2000x2550 6950
LDE 880 MTU 12 V 2000 G65 12 23880 202 880 800 4400x2000x2350 6500 4400x2000x2550 7200
LDE 1020 MTU 16 V 2000 G25 16 31840 196 1020 925 5000x2000x2350 7670 5000x2000x2550 8500
LDE 1120 MTU 16 V 2000 G65 16 31840 195 1120 1020 5000x2000x2350 9300 5000x2000x2550 8700
LDE 1265 MTU 18 V 2000 G65 18 35820 200 1265 1150 5500x2300x2500 9300 5500x2300x2650 10200
LDE 1880 MTU 12 V 4000 G23 12 57200 194 1880 1670 7000x2500x2600 12500 container 40 ft 19500
LDE 2085 MTU 12 V 4000 G63 12 57200 190 2085 1880 7000x2500x2600 13000 container 40 ft 20000
LDE 2285 MTU 16 V 4000 G23 16 76300 193 2285 2145 7500x2500x2800 15500 container 40 ft 22300
LDE 2595 MTU 16 V 4000 G63 16 76300 193 2595 2285 7500x2500x2800 16200 container 40 ft 23000
LDE 2870 MTU 20 V 4000 G23 20 95400 199 2870 2610 8500x2800x3200 21000 container 40 ft 28800
LDE 3170 MTU 20 V 4000 G63 20 95400 196 3170 2870 8500x2800x3200 21800 container 40 ft 29600
LDE 3310 MTU 20 V 4000 G63 L 20 95400 195 3310 3075 8500x2800x3200 22600 container 40 ft 30400

Genset for island operation, standby and parallel operation with the network and / or other genset. standard equipment of the generating sets: engine cooling system, starter, alternator and exhaust silencer, alternator with automatic voltage regulator (avr), baseframe with fuel tank and the collecting vessel, basic wiring, batteries, coolant and lubricating oil.

MTU engines

MTU engines provide low fuel consumption and long service intervals, while achieving low emissions. Because of their rigid design engines operate smoothly and with minimal vibration. Because of low vibration the engines are suitable for operation in sensitive environments as well as in extreme conditions. For optimal performance, the engines are designed to allow the acquisition of high load in one step. This means that you can quickly take the required loads and can be used for the most demanding applications. Engine development for a friendly service and maintenance allows a minimum loss of time and failure to act during these tasks.  MTU engines are distinguished by low fuel consumption and low maintenance costs.

Alternators

the alternators are synchronous, three-phase, brushless, self-regulated, self-excited, self-ventilated and 4 pole. insulation class h (temperature rise according to class f or b on request). tropical impregnation for salty-humid environment is possible on request. automatic voltage regulation. protection class ip21 or ip23 (other class on request).

Base Frame

steel construction - monobloc. anti-vibration mounting to eliminate the vibration. powder coated with primer and  cover color. the base frame is designed to enable simple lifting and moving the generating set.

Fuel Tank

the fuel tank is mounted on the inside of the base frame. under the fuel tank, a collecting vessel is mounted, which prevents outpouring of any liquid from the generating set into the environment. equiped with all necessary connectors and sensors. standard autonomy of the tank is 8-10 hours at 75% load. additional freestanding double wall tanks and automation for pumping fuel on demand.

Control Panels

manual – includes a manual control unit (push button / key start type), main circuit breaker, differential protection and all auxiliary controls and alarms.

automatic – includes an automatic control unit that starts the genset in case of mains failure (it can be started manually too), main circuit breaker, differential protection and all auxiliary controls and alarms, button for emergency stop, changeover genset / mains (ats) on request.

synchronization – automatic control cabinet for synchronization more generating sets and / or main electricity network and parallel operation. additional and special control and switching cabinets for genset on demand.

For more info

BiH

  • +387 32 24 58 37
  • stubelj@bih.net.ba
  • Stubelj Co. d.o.o.

    g. Sabahudin Šerić

    Fra Grge Martića br.15

    BiH - 72 000 Zenica

Kosovo

Makedonija